Thursday, February 11, 2010

Anode Use For Boats How Would You Make Your Own Hang Over The Side Zinc Anode For Your Boat. Does It Have To Be Grounded ?

How would you make your own hang over the side zinc anode for your boat. Does it have to be grounded ? - anode use for boats

Good answers above, to clarify, however, must have the block of zinc or skirt an electrical connection to the trunk or axis. So in a sense, is "country", his ship. Try a simple multimeter. Here too, the zinc should be below the waterline and that this protection is only required for salt or brackish water.

2 comments:

Alan Turing said...

Normally you buy a sacraficial zinc in the shop for yachts that are in salt water. Probably need fresh water for boating.

It's called "zinc", because it consists of pure zinc. Zinc is corrosive than other metals, so that electrochemical reactions take place in steel, copper and other metals in contact with water.

Zinc is typically connected to the axis of the vessel. It is screwed around the tree. No castle is in two variants, with space for the hemisphere in the central axis. The screws are supplied with zinc, if you buy it.

Take for diving (in the San Francisco Bay, had a wetsuit, to freeze to death in water or avoiding bear 54 degrees, while zinc in combination with my sailboat and# 039; s-axis) and add it. Alternatively, you can also choose someone to do it for you.

You want to bind not only to your boat and put him in the water. Must be in physical contact with the metal of the boat.

Zinc is required for one years in sea water on the amount of metal in contact with water. If you do not have a cabinet of zinc and the ship is at sea, which has to be done now. You can do much damage to a vessel if it is a zinc.

polloloc... said...

I suspect you have a boat with a metal casing. Simply add a large piece of zinc to a bare metal part of the boat and make sure the zinc in the water. The most important thing is that the piece of zinc on the piece of metal trying to get connected with a solid protection conductive connection, probably a cable.

No, it needs to be established.

Here are details on the applications of the boat:
http://www.boatus.com/boattech/casey/23. ...

That's how it works:
If you have two different metals (steel, a number of components, dipped, for example) in an electrolyte (salt water in this case), current flows between two metals. The thing is, electrons from an atom and travels to other metal ions are removed, and fROM in the past, to be neutral metal atoms. The swimmer then lead to corrosion.

When you install a sacrificial anode made of zinc, causing the electrical current between what she is trying to protect and to the other metal that steals electrons, these electrons are released. Zinc is a potential for a negative electrode, that is, it will be easier to stop the electrons. Thus, the zinc corrodes in place of metal depend on you!

Post a Comment